在 Admin Router 前配置 HAProxy

使用 HAProxy 为 DC/OS Admin Router 设置 HTTP 代理

您可以使用 HAProxy 在 DC/OS [Admin Router] 前设置 HTTP 代理。(/mesosphere/dcos/cn/2.1/overview/architecture/components/#admin-router). 让 Admin Router 通过 HTTPS 将自定义服务器证书提供给连接到群集的用户代理,这在以前可能非常有用。从 DC/OS 2.1 开始,可以更直接地使用 自定义外部证书 来实现这一点。

HTTP 代理必须执行即时 HTTP 请求和响应标头修改,因为 DC/OS 不知道用户代理程序用于寻址 HTTP 代理的自定义主机名和端口。

以下说明提供了经测试的 HAProxy 配置示例,其处理命名请求/响应重写。此示例确保 HAProxy 和 DC/OS Admin Router 之间的通信是 TLS 加密的。

  1. 安装 HAProxy 1.6.9

  2. 为 DC/OS 创建 HAProxy 配置。本示例适用于 AWS 上的 DC/OS 群集。有关 HAProxy 配置参数的更多信息,请参阅文档.

    您可以使用代理 IP 地址 DNS 条目找到您的任务 IP。

    <taskname>.<framework_name>.agentip.dcos.thisdcos.directory
    

    其中:

    • taskname:任务名称。
    • framework_name:框架名称,如果您不确定,则可能是 marathon
    global
      daemon
      log 127.0.0.1 local0
      log 127.0.0.1 local1 notice
      maxconn 20000
      pidfile /var/run/haproxy.pid
    defaults
      log            global
      option         dontlog-normal
      mode		 http
      retries             3
      maxconn          20000
      timeout connect  5000
      timeout client  50000
      timeout server  50000
    
    frontend http
      # Bind on port 9090. HAProxy will listen on port 9090 on each
      # available network for new HTTP connections.
      bind 0.0.0.0:9090
      # Specify your own server certificate chain and associated private key.
      # See https://cbonte.github.io/haproxy-dconv/configuration-1.6.html#5.1-crt
      # bind *:9091 ssl crt /path/to/browser-trusted.crt
      #
      # Name of backend configuration for DC/OS.
      default_backend dcos
    
      # Store request Host header temporarily in transaction scope
      # so that its value is accessible during response processing.
      # Note: RFC 7230 requires clients to send the Host header and
      # specifies it to contain both, host and port information.
      http-request set-var(txn.request_host_header) req.hdr(Host)
    
      # Overwrite Host header to 'dcoshost'. This makes the Location
      # header in DC/OS Admin Router upstream responses contain a
      # predictable hostname (NGINX uses this header value when
      # constructing absolute redirect URLs). That value is used
      # in the response Location header rewrite logic (see regular
      # expression-based rewrite in the backend section below).
      http-request set-header Host dcoshost
    
    backend dcos
      # Option 1: use TLS-encrypted communication with DC/OS Admin Router and
      # perform server certificate verification (including hostname verification).
      # If you are using the community-supported version of DC/OS, you must
      # configure Admin Router with a custom TLS server certificate, see
      # /mesosphere/dcos/2.1/administering-clusters/. This step
      # is not required for DC/OS Enterprise.
      #
      # Explanation for the parameters in the following `server` definition line:
      #
      # 1.2.3.4:443
      #
      #   IP address and port that HAProxy uses to connect to DC/OS Admin
      #   Router. This needs to be adjusted to your setup.
      #
      #
      # ssl verify required
      #
      #   Instruct HAProxy to use TLS, and to error out if server certificate
      #   verification fails.
      #
      # ca-file dcos-ca.crt
      #
      #   The local file `dcos-ca.crt` is expected to contain the CA certificate
      #   that Admin Router's certificate will be verified against. It must be
      #   retrieved out-of-band (on Mesosphere DC/OS Enterprise this can be
      #   obtained via https://dcoshost/ca/dcos-ca.crt)
      #
      # verifyhost frontend-xxx.eu-central-1.elb.amazonaws.com
      #
      #   When verifying the TLS certificate presented by DC/OS Admin Router,
      #   perform hostname verification using the hostname specified here
      #   (expect the server certificate to contain a DNSName SAN that is
      #   equivalent to the hostname defined here). The hostname shown here is
      #   just an example and needs to be adjusted to your setup.
    
      server dcos-1 1.2.3.4:443 ssl verify required ca-file dcos-ca.crt verifyhost frontend-xxx.eu-central-1.elb.amazonaws.com
    
      # Option 2: use TLS-encrypted communication with DC/OS Admin Router, but do
      # not perform server certificate verification (warning: this is insecure, and
      # we hope that you know what you are doing).
      # server dcos-1 1.2.3.4:443 ssl verify none
      #
      # Rewrite response Location header if it contains an absolute URL
      # pointing to the 'dcoshost' host: replace 'dcoshost' with original
      # request Host header (containing hostname and port).
      http-response replace-header Location https?://dcoshost((/.*)?) "http://%[var(txn.request_host_header)]\1"
    
  3. 使用这些设置启动 HAProxy。